Please login or register.

Login with username, password and session length
Pages: [1] |   Go Down

Author Topic: Electrical: Electronic Ignition  (Read 12681 times)

0 Members and 1 Guest are viewing this topic.


  • Global Moderator
  • Dippy Oracle
  • *
  • Offline
  • Canada
  • Posts: 9235
Electrical: Electronic Ignition
« on: December 29, 2007, 14:10:43 »

This is the wiring diagram for doing the electronic ignition change with a vacuum distributor. The start wire hooks upto the starter relay at the ballast resistor spot and the run wire hooks up to the blue power wire that used to go to the computer. Use a volt meter or test light to find it. Instructions for this change will be at this link:  Electronic Ignition Swap
« Last Edit: February 18, 2011, 23:28:16 by Reggie »

  • Advertisement
  • ***
Pages: [1] |   Go Up